Hosting Discussion Forums

Hosted Email Discussion => Hosted E-Mail Requests => Topic started by: santhoshidatasoft on March 19, 2014, 05:05:54 AM

Title: What are Difference between STP and UTP?
Post by: santhoshidatasoft on March 19, 2014, 05:05:54 AM
What are Difference between STP and UTP?
Title: Re: What are Difference between STP and UTP?
Post by: anil123 on March 21, 2014, 07:20:31 PM
UTP is Unshielded Twisted Pair. The majority of Ethernet networks utilize this type of cabling. As the name implies this cable doesn't have a shield to protect from electrical interference.

STP is Shielded Twisted Pair. It is the same as UTP but has a shield inside to protect from electrical interference. It should be used in Token Ring networks or in Ethernet networks where electrical interference may be a problem.

STP is more expensive and bulkier than UTP due to the shield.
Title: Re: What are Difference between STP and UTP?
Post by: afsalabdulla on March 22, 2014, 01:55:07 AM
Hello,

If we complete deep comparison of STP and UTP in the characteristics that both of them are sharing, we might find many similarities.

Both types of cable are able to transmit data with great speeds of 10 Mbps, 100 Mbps, 1 Gbps, and 10 Gbps. Throughput can be affected by the cable grade and method used for data transmission.

RJ-45 is being used for both STP and UTP. It is a modular connector and data jack, that look very similar with RJ-11 phone connector. Figure 1 is showing comparison between RJ-11 and RJ-45. Note that all Ethernet networks with twisted pair cabling are using RJ-45.

Maximum length of the STP segment is exactly the same as the maximum length of the UTP 100 m (328 feet). It is true for the Ethernet with data rate from 1 Mbps to 1 Gbps. Maximum amount of nodes is 1024.

However, due to the different manufacturing processes, there are some tremendous differences between STP and UTP, mainly in cost and noise immunity.

STP is containing greater amount of materials than UTP, having more difficult manufacturing process and installation is more expensive due to required grounding . Depending on the type of UTP, its cost may increase when more features are added.

Thanks
afsal
Title: Re: What are Difference between STP and UTP?
Post by: santhoshidatasoft on December 07, 2016, 05:06:46 AM
UTP is Unshielded Twisted Pair. The majority of Ethernet networks utilize this type of cabling. As the name implies this cable doesn't have a shield to protect from electrical interference.

STP is Shielded Twisted Pair. It is the same as UTP but has a shield inside to protect from electrical interference. It should be used in Token Ring networks or in Ethernet networks where electrical interference may be a problem.

STP is more expensive and bulkier than UTP due to the shield.
Title: Re: What are Difference between STP and UTP?
Post by: RH-Calvin on April 06, 2017, 01:57:37 AM
1. STP cables are shielded while UTP cables are unshielded
2. STP cables are more immune to interference and noise than UTP cables
3. STP cables are better at maximizing bandwidth compared to UTP cables
4. STP cables cost more per meter compared to UTP cables
5. STP cables are heavier per meter compared to UTP cables
6. UTP cables are more prevalent in SOHO networks while STP is used in more high-end applications