Author Topic: What are the various types of Multiplexing?  (Read 1444 times)

sabithppk

  • Green Belt
  • *****
  • Posts: 230
  • Karma: +0/-0
What are the various types of Multiplexing?
« on: March 16, 2014, 09:11:19 AM »
What are the various types of Multiplexing?

Rizwan

  • Green Belt
  • *****
  • Posts: 234
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #1 on: March 17, 2014, 11:09:20 AM »
Hello,


In telecommunications and computer networks, multiplexing (sometimes contracted to muxing) is a method by which multiple analog message signals or digital data streams are combined into one signal over a shared medium. The aim is to share an expensive resource

jaswin.datasoft

  • Green Belt
  • *****
  • Posts: 418
  • Karma: +1/-0
Re: What are the various types of Multiplexing?
« Reply #2 on: March 21, 2014, 07:26:10 AM »
To combine multiple signals (analog or digital) for transmission over a single line or media. A common type of multiplexing combines several low-speed signals for transmission over a single high-speed connection. The following are several examples of different multiplexing methods:
Frequency Division Multiplexing (FDM) : each signal is assigned a different frequency
Time Division Multiplexing (TDM) : each signal is assigned a fixed time slot in a fixed rotation
Statistical Time Division Multiplexing (STDM): time slots are assigned to signals dynamically to make better use of bandwidth
Wavelength Division Multiplexing (WDM) : each signal is assigned a particular wavelength; used on optical fiber.

priyanka

  • Brown belt
  • ******
  • Posts: 723
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #3 on: March 23, 2014, 04:45:37 AM »
hi,

There are two basic forms of multiplexing used:

    Time division multiplexing (TDM)
    Frequency division multiplexing (FDM)


Thanks
priyanka

jaswin.datasoft

  • Green Belt
  • *****
  • Posts: 418
  • Karma: +1/-0
Re: What are the various types of Multiplexing?
« Reply #4 on: March 23, 2014, 10:44:12 AM »

In telecommunications and computer networks, multiplexing (sometimes contracted to muxing) is a method by which multiple analog message signals or digital data streams are combined into one signal over a shared medium. The aim is to share an expensive resource
Frequency Division Multiplexing (FDM) : each signal is assigned a different frequency
Time Division Multiplexing (TDM) : each signal is assigned a fixed time slot in a fixed rotation
Statistical Time Division Multiplexing (STDM): time slots are assigned to signals dynamically to make better use of bandwidth
Wavelength Division Multiplexing (WDM) : each signal is assigned a particular wavelength; used on optical fiber.

prakash.datasoft

  • Green Belt
  • *****
  • Posts: 295
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #5 on: March 27, 2014, 03:23:12 AM »
hello sir


In telecommunications and computer networks, multiplexing (sometimes contracted to muxing) is a method by which multiple analog message signals or digital data streams are combined into one signal over a shared medium. The aim is to share an expensive resource



thanks

santhoshidatasoft

  • Brown belt
  • ******
  • Posts: 668
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #6 on: May 02, 2014, 02:26:16 AM »
types of Multiplexing
Space-division multiplexing
Frequency-division multiplexing
Time-division multiplexing
Polarization-division multiplexing
Orbital angular momentum multiplexing
Code-division multiplexing

Rizwan

  • Green Belt
  • *****
  • Posts: 234
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #7 on: May 03, 2014, 10:53:08 AM »
Hello


To combine multiple signals (analog or digital) for transmission over a single line or media. A common type of multiplexing combines several low-speed signals for transmission over a single high-speed connection. The following are several examples of different multiplexing methods:
Frequency Division Multiplexing (FDM) : each signal is assigned a different frequency
Time Division Multiplexing (TDM) : each signal is assigned a fixed time slot in a fixed rotation
Statistical Time Division Multiplexing (STDM): time slots are assigned to signals dynamically to make better use of bandwidth
Wavelength Division Multiplexing (WDM) : each signal is assigned a particular wavelength; used on optical fiber.

anil123

  • Green Belt
  • *****
  • Posts: 455
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #8 on: May 03, 2014, 07:35:09 PM »
In telecommunications and computer networks, multiplexing (sometimes contracted to muxing) is a method by which multiple analog message signals or digital data streams are combined into one signal over a shared medium. The aim is to share an expensive resource. For example, in telecommunications, several telephone calls may be carried using one wire. Multiplexing originated in telegraphy in the 1870s, and is now widely applied in communications. In telephony, George Owen Squier is credited with the development of telephone carrier multiplexing in 1910.

The multiplexed signal is transmitted over a communication channel, which may be a physical transmission medium. The multiplexing divides the capacity of the high-level communication channel into several low-level logical channels, one for each message signal or data stream to be transferred. A reverse process, known as demultiplexing, can extract the original channels on the receiver side.

A device that performs the multiplexing is called a multiplexer (MUX), and a device that performs the reverse process is called a demultiplexer (DEMUX or DMX).

anil123

  • Green Belt
  • *****
  • Posts: 455
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #9 on: May 05, 2014, 11:00:48 AM »
In telecommunications and computer networks, multiplexing (sometimes contracted to muxing) is a method by which multiple analog message signals or digital data streams are combined into one signal over a shared medium. The aim is to share an expensive resource. For example, in telecommunications, several telephone calls may be carried using one wire. Multiplexing originated in telegraphy in the 1870s, and is now widely applied in communications. In telephony, George Owen Squier is credited with the development of telephone carrier multiplexing in 1910.

The multiplexed signal is transmitted over a communication channel, which may be a physical transmission medium. The multiplexing divides the capacity of the high-level communication channel into several low-level logical channels, one for each message signal or data stream to be transferred. A reverse process, known as demultiplexing, can extract the original channels on the receiver side.

A device that performs the multiplexing is called a multiplexer (MUX), and a device that performs the reverse process is called a demultiplexer (DEMUX or DMX).

Inverse multiplexing (IMUX) has the opposite aim as multiplexing, namely to break one data stream into several streams, transfer them simultaneously over several communication channels, and recreate the original data stream.

Rizwan

  • Green Belt
  • *****
  • Posts: 234
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #10 on: May 26, 2014, 03:35:32 AM »
Hello


Types of Multiplexing
Space-division multiplexing
Frequency-division multiplexing
Time-division multiplexing
Polarization-division multiplexing
Orbital angular momentum multiplexing
Code-division multiplexing

rahesh.datasoft

  • Blue Belt
  • ****
  • Posts: 175
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #11 on: May 26, 2014, 11:14:05 AM »
hi

There are two basic techniques:

Frequency-Division Multiplexing (FDM)
Time-Division Multiplexing (TDM)
Synchronous TDM
A-Synchronous TDM
These types of multiplexing are shown in the figure.


Thanks

santhoshidatasoft

  • Brown belt
  • ******
  • Posts: 668
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #12 on: May 27, 2014, 01:29:44 AM »
To combine multiple signals (analog or digital) for transmission over a single line or media. A common type of multiplexing combines several low-speed signals for transmission over a single high-speed connection. The following are several examples of different multiplexing methods:
Frequency Division Multiplexing (FDM) : each signal is assigned a different frequency
Time Division Multiplexing (TDM) : each signal is assigned a fixed time slot in a fixed rotation
Statistical Time Division Multiplexing (STDM): time slots are assigned to signals dynamically to make better use of bandwidth
Wavelength Division Multiplexing (WDM) : each signal is assigned a particular wavelength; used on optical fiber.

santhoshidatasoft

  • Brown belt
  • ******
  • Posts: 668
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #13 on: May 31, 2014, 12:57:11 AM »
Types of Multiplexing
Space-division multiplexing
Frequency-division multiplexing
Time-division multiplexing
Polarization-division multiplexing
Orbital angular momentum multiplexing
Code-division multiplexing

nidhinpereira

  • Green Belt
  • *****
  • Posts: 261
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #14 on: July 01, 2014, 07:45:02 PM »
In telecommunications and computer networks, multiplexing (sometimes contracted to muxing) is a method by which multiple analog message signals or digital data streams are combined into one signal over a shared medium. The aim is to share an expensive resource. For example, in telecommunications, several telephone calls may be carried using one wire. Multiplexing originated in telegraphy in the 1870s, and is now widely applied in communications. In telephony, George Owen Squier is credited with the development of telephone carrier multiplexing in 1910.

The multiplexed signal is transmitted over a communication channel, which may be a physical transmission medium (e.g. a cable). The multiplexing divides the capacity of the high-level communication channel into several low-level logical channels, one for each message signal or data stream to be transferred. A reverse process, known as demultiplexing, can extract the original channels on the receiver side.

A device that performs the multiplexing is called a multiplexer (MUX), and a device that performs the reverse process is called a demultiplexer (DEMUX or DMX).

Inverse multiplexing (IMUX) has the opposite aim as multiplexing, namely to break one data stream into several streams, transfer them simultaneously over several communication channels, and recreate the original data stream.