Author Topic: What are the various types of Multiplexing?  (Read 2073 times)

swetha

  • Brown belt
  • ******
  • Posts: 687
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #15 on: July 01, 2014, 11:47:57 PM »
hii,

In telecommunications and computer networks, multiplexing (sometimes contracted to muxing) is a method by which multiple analog message signals or digital data streams are combined into one signal over a shared medium. The aim is to share an expensive resource. For example, in telecommunications, several telephone calls may be carried using one wire. Multiplexing originated in telegraphy in the 1870s, and is now widely applied in communications. In telephony, George Owen Squier is credited with the development of telephone carrier multiplexing in 1910.

The multiplexed signal is transmitted over a communication channel, which may be a physical transmission medium. The multiplexing divides the capacity of the high-level communication channel into several low-level logical channels, one for each message signal or data stream to be transferred. A reverse process, known as demultiplexing, can extract the original channels on the receiver side.

A device that performs the multiplexing is called a multiplexer (MUX), and a device that performs the reverse process is called a demultiplexer (DEMUX or DMX).

Inverse multiplexing (IMUX) has the opposite aim as multiplexing, namely to break one data stream into several streams, transfer them simultaneously over several communication channels, and recreate the original data stream.

Thanks,
swetha.

nidhinpereira

  • Green Belt
  • *****
  • Posts: 261
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #16 on: December 21, 2014, 02:59:26 PM »
hello sabith,
Multiplexing is a technology to transfer digital or analog data in daily use devices like telephone and television. Here, we discuss the various multiplexing technologies used for data transmission.

    Multiplexing is a method of combining multiple analog massage signals or digital data streams into one signal. The objective of this technology is to share an expensive medium for transmitting multiple signals. Actually, the low-level communication signals are divided into high-level logical channels using this technology. Furthermore, each channel is then used for transmitting one message signal or data stream.

    Multiplexing Technologies

    Here, we take a look at different multiplexing technologies used to transfer analog and digital signals.
    Time Division

    The time division multiplexing technology uses a multiplexor to collect and store incoming signals from the slow lines connected to it by distributing a time slot on the fast link to each in turn. The message signals are sent one after another. They are then received and separated by a demultiplexor according to the time slot provided for each signal. The transmission speed of the fast link is equal to the sum of all the slow speed signals coming into the multiplexor.

    There are two methods of time division multiplexing.
The multiplexor used in this method distributes equal time to each device connected to it. It gives the time slot for the device, too, that doesn’t transmit any signal at a particular time, which means this method gives a time slot to each device whether they are transmitting signals or not. This is the main drawback of this system because there would be many times when the distributed time slices are not being used. Therefore, this method doesn’t provide maximum line usage and efficiency. It is used basically in T1 and E1 connections.

Asynchronous TDM

The asynchronous multiplexing technique is far better than synchronous multiplexing. In this system, time slots are allocated only for devices that have something to transfer. Therefore, this technique requires more processing time than synchronous TDM. However, we achieve maximum efficiency and line usage using this technique. Asynchronous Transfer Mode network is a well-known data transfer system that uses this technology.
Frequency Division

In frequency division multiplexing, the signals are transferred along the high speed link simultaneously. This is done by setting a different frequency for each signal. It is essential to avoid overlapping of frequencies while transmitting signals. To do so, the link must have enough bandwidth so as it can carry a wide range of frequencies. The demultiplexor present at the receiver side then separates the signals according to the frequencies.

It is similar to a radio broadcasting, in which all the stations broadcast the signals simultaneously but on varying frequencies. The receiver is then tuned to receive the signals from the desired station. A general use of this technology is in cable television.

The bandwidth provided by this system is equal to the combination of the bandwidth of all the signals. To avoid signal overlapping, guard bands are used that works like a strip of frequency to separate the signals.

The most important type of FDM is orthogonal frequency division multiplexing. In this technology, closely spaced orthogonal subcarriers are used in a large scale to carry signals. The signals are divided into several parallel channels, and each channel is then transferred through a subcarrier. Each subcarrier is modulated at low speed using conventional modulation methods such as quadrature amplitude modulation or phase shift keying.
Wavelength Division

The wavelength division multiplexing is similar to the frequency division multiplexing and uses fiber optical cable to transmit the System Using Wavelength Multiplexing signals. This technique is also used for combining a large number of optical carrier signals. It is based upon a laser that is used to emit single colors of light. Each signal that needs to transmit is attached to the laser that will emit a colored light beam and the color will be different for different signal. Theses light beams are then sent simultaneously. The receiver at the other end then splits the individual colors.

There are two types of wavelength division multiplexing.

Coarse Wavelength Division

This technique uses a small number of channels, usually four or eight. Channel spacing used in it is of 20 nm and the nominal wavelengths are taken in between 1310 to 1610. Wavelength tolerance provided in the transmitters is quite large, for example ±3 nm. Bit rate of the signal channel is in between 1 and 3.125 gigabit/second.

Dense wavelength division

Dense wavelength division multiplexing is for transferring very large data. This technique uses a large number of channels such as 40, 80, and 160. However, the channel spacing is very small such as 12.5, 25, and 50. Instead, the transmitters are required to meet the wavelength tolerance accurately. Bit-rate of the signal channel might be in between 1 and 10 GB/s.
Code division

In code division multiplexing, bits of the signals are transferred through coded channels. This coding of channels is done by unique time dependent series of short pulses that are allocated within the larger bit time. All the channels having different codes are then transferred through the same fiber cable and received asynchronously by the demultiplexor.
Statistical

The statistical technology is used for dynamically assigning the compression bitrates for each channel according to the video complexity and motion requirements. It combines multiple video streams and forms a single carrier. It controls the overall bandwidth and thereby provides better efficiency and delivers outstanding video quality.

This technology uses a group of encoders and this group shares a fixed quantity of bandwidth. The bandwidth is then distributed to these encoders according to the requirement. This means that the encoder containing more complex video can borrow more bandwidth and the encoder containing less difficult video takes less bandwidth.
Summary

The different types of multiplexing technologies are very useful to transfer data with a high speed. They are used in very common areas such as telephone and television. They have made a significant impact on data transmission in the past few years.

ravinder.k

  • Blue Belt
  • ****
  • Posts: 148
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #17 on: December 23, 2014, 11:53:26 AM »
 technique whereby two or more independent messages, or information-bearing signals, are carried by a single common medium, or channel. When multiplexing is performed, two or more channels are combined into a single channel, or, in a process often called demultiplexing, a single channel is divided into several subchannels. Many different types of multiplexing are possible. One type is frequency-division multiplexing, in which a single frequency channel is subdivided into two or more subchannels, each of which can then carry a smaller range of frequencies than could the original channel. Frequency-division multiplexing is used in television broadcasting, when audio and video signals share a single channel; in stereophonic FM radio broadcasting, when two audio signals share a single channel; and in microwave transmission of long-distance telephone calls, when 60 or more conversations are carried by a single microwave beam. A second type of multiplexing is time-division multiplexing, in which successive small time intervals are used for the transmission of messages over a single channel. Time-division multiplexing is often used in the construction of digital computers. When information can be stored into or retrieved from the computer's memory at a much greater rate than it can be supplied or used by an external device such as a card reader, printer, or teletype terminal, several such low-speed devices can share a single multiplexed data channel.

ravinder.k

  • Blue Belt
  • ****
  • Posts: 148
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #18 on: December 29, 2014, 12:34:46 PM »
Hello
Multiplexing means combining multiple
streams of information for transmission over a
shared medium
Frequency Division Multiplexing.
• Wavelength Division Multiplexing.
• Time Division Multiplexing.
• Statistical Time Division Multiplexing.
• Code Division Multiplexing.

hruthika

  • Brown belt
  • ******
  • Posts: 872
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #19 on: December 30, 2014, 02:33:07 AM »
Hi,

Multiplexing is the set of techniques that allows the simultaneous transmission of multiple signals across a single data link. Whenever the transmission capacity of a medium linking two devices is greater than the transmission needs of the devices, the link can be shared in order to maximize the utilization of the link, such as one cable can carry a hundred channels of TV.

Type of multiplexing

There are two basic techniques:

Frequency-Division Multiplexing (FDM)
Time-Division Multiplexing (TDM)
Synchronous TDM
A-Synchronous TDM

Thanks.

ravinder.k

  • Blue Belt
  • ****
  • Posts: 148
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #20 on: January 03, 2015, 12:23:34 PM »
Multiplexing is used in situations where the transmitting media is having higher bandwidth, but
the signals have lower bandwidth. Hence there is a possibility of sending number of signals
simultaneously. In this situation Multiplexing can be used to achieve the following goals:
 To send a large number of signals simultaneously.
 To reduce the cost of transmission
 To make effective use of the available bandwid
Time division multiplexing (TDM)
Frequency division multiplexing (FDM)
Code division multiplexing (CDM)
Wavelength division multiplexing (WDM)

hruthika

  • Brown belt
  • ******
  • Posts: 872
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #21 on: February 18, 2015, 07:48:07 PM »
Hi,

In telecommunications and computer networks, multiplexing (sometimes contracted to muxing) is a method by which multiple analog message signals or digital data streams are combined into one signal over a shared medium. The aim is to share an expensive resource
Frequency Division Multiplexing (FDM) : each signal is assigned a different frequency
Time Division Multiplexing (TDM) : each signal is assigned a fixed time slot in a fixed rotation
Statistical Time Division Multiplexing (STDM): time slots are assigned to signals dynamically to make better use of bandwidth
Wavelength Division Multiplexing (WDM) : each signal is assigned a particular wavelength; used on optical fiber.

Thanks.

santhoshidatasoft

  • Brown belt
  • ******
  • Posts: 668
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #22 on: February 28, 2015, 10:34:29 PM »
There are two basic forms of multiplexing used:

Time division multiplexing (TDM)
Frequency division multiplexing (FDM)

hruthika

  • Brown belt
  • ******
  • Posts: 872
  • Karma: +0/-0
Re: What are the various types of Multiplexing?
« Reply #23 on: March 01, 2015, 07:31:16 PM »
Hi,

In telecommunications and computer networks, multiplexing (sometimes contracted to muxing) is a method by which multiple analog message signals or digital data streams are combined into one signal over a shared medium. The aim is to share an expensive resource
Frequency Division Multiplexing (FDM) : each signal is assigned a different frequency
Time Division Multiplexing (TDM) : each signal is assigned a fixed time slot in a fixed rotation
Statistical Time Division Multiplexing (STDM): time slots are assigned to signals dynamically to make better use of bandwidth
Wavelength Division Multiplexing (WDM) : each signal is assigned a particular wavelength; used on optical fiber.


Thanks.