Author Topic: Help  (Read 1817 times)

johnmical

  • Blue Belt
  • ****
  • Posts: 102
  • Karma: +0/-0
Help
« on: August 06, 2013, 04:37:25 PM »

Hello,


Why Internet Explorer is very slow??

How to resolve it?


Thanks,
Johnmical

Shemeer

  • Blue Belt
  • ****
  • Posts: 108
  • Karma: +0/-0
Re: Help
« Reply #1 on: August 06, 2013, 04:41:32 PM »

Hello John,

Please just try the give 4 steps:
1. Upgrade to a newer version of Internet Explorer
2. Reset Internet Explorer settings:
To automatically reset Internet Explorer settings, run the Reset Internet Explorer Settings Fix It.
3. Check your Internet connection
4. Disable add-ons :
While browser add-ons can enhance your online experience, they can occasionally interfere or conflict with other software on your computer. Try starting Internet Explorer without add-ons to see if the problem goes away.
If disabling add-ons solves the problem, you might want to use Manage Add-ons (which you can find on the Tools menu) to disable all add-ons and then turn on add-ons only as you use them. This will allow you to figure out which add-on is causing the problem.


Thanks,
Shemeer

johnmical

  • Blue Belt
  • ****
  • Posts: 102
  • Karma: +0/-0
Re: Help
« Reply #2 on: August 13, 2013, 10:05:02 AM »

Hello Shemeer,


Can you explain what is the difference between IP address and MAC address??


Thanks,

Shemeer

  • Blue Belt
  • ****
  • Posts: 108
  • Karma: +0/-0
Re: Help
« Reply #3 on: August 13, 2013, 10:09:00 AM »

Hello john,

The MAC address, Media Access Control, is a physical address of any device connected to a network.
Every device has a unique MAC address. MAC addresses are used by end devices and switches to determine exactly where that device is located on the network.

An Internet Protocol (IP) address is either 32 bits or 128 bits long, depending on whether it is an IP version 4 (IPv4) or an IP version 6 (IPv6) address which is used to identify the logical (not physical) location of your computer on a network. Every computer on a network must have a unique IP address.

I hope you got the point!!

Thanks,
Shemeer

akash.datasoft

  • Green Belt
  • *****
  • Posts: 216
  • Karma: +0/-0
Re: Help
« Reply #4 on: August 13, 2013, 12:31:10 PM »
hi,

There might be some , issue with settings of the internet explorer , to resolve your issue open the internet explorer , Go the Tools > internet options > Advance . and after that click on the reset button , it may solver your issue .

Note: If internet explorer working slow. you can follow some steps.
Solution:

1: Create restore point and take registry backup.
2: Delete all temp files.
3: Delete all unwanted software's and security software's from add/remove program.
4: Disable all unwanted services from startup and then remove from registry.
5: Reset internet explorer and then register all .dll files.
6: Scan with spyware removal and trojon removal.
7: Check windows update if found and then download and install.
8: Restart the computer.


thanks
akash.datasoft

afsalabdulla

  • Green Belt
  • *****
  • Posts: 218
  • Karma: +0/-0
Re: Help
« Reply #5 on: August 14, 2013, 04:25:28 AM »
Hello...

A MAC ID is a hardware ID. Most devices like video card, modems, communication adapters and other add-on devices all have a unique ID. It is usually created at the time of manufacture and cannot be changed.

An IP address is an address on a network that identifies that computer on the network. IP addresses are assigned by the network administrator (or automatically by a router. IP addresses are not permanent. If you have a laptop, then your IP address when connected to your home network will be different from the IP address you have when you connect to your office network.

Thanks
afsal.datasoft

jaswin.datasoft

  • Green Belt
  • *****
  • Posts: 418
  • Karma: +1/-0
Re: Help
« Reply #6 on: August 14, 2013, 04:24:38 PM »
hello,

An IP Address is a numeric representation of a device (computer, game console, etc.) on a computer network
that uses TCP/IP to communicate (the logical connection of most of the internet).

A MAC Address is a numeric representation of a device (computer, game console, etc.) on a computer network
that uses Ethernet to communicate (the physical connection between most computers and routers).

The Media Access Control (MAC) address is the physical address of any device connected to a network. Every device has a unique MAC address. MAC addresses are used by end devices and switches to determine exactly where that device is located on the network. MAC addresses are 48 bits long and are written in hexadecimal notation (also called Hex). The first three sections of the MAC address normally are used to identify the manufacturer of the device.

An Internet Protocol (IP) address is either 32 bits or 128 bits long, depending on whether it is an IP version 4 (IPv4) or an IP version 6 (IPv6) address. IPv4 is slowly being phased out on the public Internet because we are running out of addresses.

HaliRazik

  • Blue Belt
  • ****
  • Posts: 131
  • Karma: +0/-0
Re: Help
« Reply #7 on: August 25, 2013, 11:52:27 AM »
Hiii,  :)
  What is network security  ???   :o

Ameen

  • Green Belt
  • *****
  • Posts: 280
  • Karma: +0/-0
Re: Help
« Reply #8 on: August 25, 2013, 11:56:50 AM »
hello,  :)
The networks are computer networks, both public and private, that are used every day to conduct transactions and communications among businesses, government agencies and individuals. The networks are comprised of "nodes", which are "client" terminals  and one or more "servers" and/or "host" computers. They are linked by communication systems, some of which might be private, such as within a company, and others which might be open to public access. The obvious example of a network system that is open to public access is the Internet, but many private networks also utilize publicly-accessible communications. Today, most companies' host computers can be accessed by their employees whether in their offices over a private communications network, or from their homes or hotel rooms while on the road through normal telephone lines.

nithin123@yahoo.com

  • Blue Belt
  • ****
  • Posts: 126
  • Karma: +0/-0
Re: Help
« Reply #9 on: August 29, 2013, 04:09:53 PM »
Hi,

Is there any difference between a Gateway and a Default Gateway ??

Nithin

amal@datasoft.ws

  • Green Belt
  • *****
  • Posts: 280
  • Karma: +0/-0
Re: Help
« Reply #10 on: August 29, 2013, 04:10:55 PM »
Hallo,

Different between gateway and default gateway gateway is converter of your network and default gateway is In computer networking.
A gateway is a node (a router) on a TCP/IP network that serves as an access point to another network.
A default gateway is the node on the computer network that the network software uses when an IP address does not match any other routes in the routing table

Thanks,

johnmical

  • Blue Belt
  • ****
  • Posts: 102
  • Karma: +0/-0
Re: Help
« Reply #11 on: September 04, 2013, 11:14:06 AM »

Hi Amal,

can you tell me how to disable the iptables firewall in linux??


Shemeer

  • Blue Belt
  • ****
  • Posts: 108
  • Karma: +0/-0
Re: Help
« Reply #12 on: September 04, 2013, 11:16:28 AM »

Hello john,


A Linux firewall is software based firewall that provides protection between your server (workstation) and damaging content on the Internet or network.
It will try to guard your computer against both malicious users and software such as viruses/worms

you can disable the iptables firewall in linux by using given command:

# /etc/init.d/iptables stop

Thanks,
Shemeer

johnmical

  • Blue Belt
  • ****
  • Posts: 102
  • Karma: +0/-0
Re: Help
« Reply #13 on: September 08, 2013, 06:53:57 AM »

Hi,

can you explain what is App Pool and App Domain?? :)
What is the difference between the two in IIS? ? :)

Shemeer

  • Blue Belt
  • ****
  • Posts: 108
  • Karma: +0/-0
Re: Help
« Reply #14 on: September 08, 2013, 06:55:53 AM »

Hello john,

This is the main difference:

1.  Application pool is created the each and every website.
2.  Application domain is created to one domain purpose.

Thanks,
Shemeer